##
#####Common section
##

##Blah common variables

#Supported batch systems (e.g. pbs,lsf)
supported_lrms=pbs,lsf,sge,slurm,condor

#DGAS logfile 
BLAHPD_ACCOUNTING_INFO_LOG=

#Set to yes if you wish to disable BLAH's machinery for transferring 
#or delegating proxies to the worker node where a job is running. (default = no)
blah_disable_wn_proxy_renewal=

#Set to yes to enable delegation (instead of copy) of renewed proxies
#to worker nodes. NOTE: limited *and* delegated proxes are not 
#accepted for default GSI authentication as of VDT 1.2, so this should
#be enabled only if non-limited proxies are used for proxy renewal. (default = no)
blah_delegate_renewed_proxies=

#Set to yes to disable creation of a limited proxy. (default = no)
blah_disable_limited_proxy=

#max number of concurrent threads to serve commands (default = 500)
blah_max_threaded_cmds=50

#Colon-separated list of paths that are shared among batch system
#head and worker nodes.
blah_shared_directories=/

#By default the job temporary work directory is created as a subdirectory
#of wherever the batch system is configured to land the job. 
#This variable changes the location where the work directory is created.
#A shell variable escaped or in single quotes will be resolved on the 
#worker node in the job environment. Non-escaped variables will be resolved 
#on the submit node in the submit environment.
#blah_wn_temporary_home_dir='$GLITE_LOCATION_TMP'

#These two attributes allow to change the directory on the worker node where 
#the batch system is instructed to transfer input/output sandbox files to 
#and from.
#These can be set in case the batch system default is not good enough
#(e.g.: the batch systems leaves output files behind)
#These variables can be resolved on the submit node -only-.
#blah_wn_inputsandbox=/tmp
#blah_wn_outputsandbox=/tmp

#The following configuration attributes allow for additional
#submit command attributes to be set in the local shell callout
#for batch system customizations.
#
#Set this variable to pass all submit command attributes:
#blah_pass_all_submit_attributes=yes
#
#-Or- select individual attributes as follows:
#blah_pass_submit_attributes[0]="x509UserProxySubject"
#blah_pass_submit_attributes[1]="x509UserProxy"

#timeout before blah kill a process (default 20) 
blah_graceful_kill_timeout=

#Enable condor/glexec commands (default no)
blah_enable_glexec_from_condor=

#umask for accounting log
blah_accounting_log_umask=

#interval between two child consecutive restart (default 150)
blah_children_restart_interval=

#if blah requires proxy on submit (default no)
blah_require_proxy_on_submit=

#disable proxy user copy (default no)
#blah_disable_proxy_user_copy=yes

##PBS common variables

#Path where PBS executables are located 
# NOTE: this path is computed many times; I worry about the overhead here.  -BB, 12-13-2012
pbs_binpath=`which qsub 2>/dev/null|sed 's|/[^/]*$||'`

#Path where the PBS logs are located ($pbs_spoolpath/server_logs)
#pbs_spoolpath=

#If it is set to yes blah does not check the jobid in the logfiles
pbs_nochecksubmission=

#If it is set to yes blah does NOT use log files to get job status, 
#but uses only standard LRMS query (qstat)  
pbs_nologaccess=yes

#If it is set to no blah scripts for PBS will not try to read 
#locally from the logs if BLParser is not present
pbs_fallback=no


##LSF common variables

#Path where LSF executables are located 
lsf_binpath=`which bsub 2>/dev/null|sed 's|/[^/]*$||'`

#Path where the LSF conf file is located ($lsf_confpath/lsf.conf)
lsf_confpath=

#If it is set to yes blah does not check the jobid in the logfiles
lsf_nochecksubmission=

#If it is set to yes blah does NOT use log files to get job status, 
#but uses only standard LRMS query (bhist)  
lsf_nologaccess=

#If it is set to no blah scripts for LSF will not try to read 
#locally from the logs if BLParser is not present
lsf_fallback=no

##
#####BLParser section
##

##PBS subsection

#Set to yes to use Blah Log Parser for PBS
pbs_BLParser=

#Host where Blah Log Parser for PBS is running
pbs_BLPserver=

#Port where Blah Log Parser for PBS is running
pbs_BLPport=

#Number of Blah Log Parser to try for PBS (if it is null pbs_BLPserver and pbs_BLPport are used)
pbs_num_BLParser=
#
pbs_BLPserver1=
pbs_BLPport1=
#
pbs_BLPserver2=
pbs_BLPport2=

# Certain Torque versions, starting with 2.4.6, don't support the
# multiple stagein/stagout directive documented in the qsub manpage due to a 
# bug.
# As a safe recipe for automatically detecting this condition at runtime cannot
# be established, this is left to manual configuration.
# Setting this attribute to 'yes' -should- be compatible with older
# Torque versions, but may be failing with PBSpro.
# A new setting ('multiline') triggers an undocumented syntax
# which is reported to be compatible with most Torque version:
# use it as failback solution if neither 'yes' nor 'no' works for you.
blah_torque_multiple_staging_directive_bug=no

##LSF subsection

#Set to yes to use Blah Log Parser for LSF
lsf_BLParser=

#Host where Blah Log Parser for LSF is running
lsf_BLPserver=

#Port where Blah Log Parser for LSF is running
lsf_BLPport=

#Number of Blah Log Parser to try for LSF (if it is null lsf_BLPserver and lsf_BLPport are used)
lsf_num_BLParser=
#
lsf_BLPserver1=
lsf_BLPport1=
#
lsf_BLPserver2=
lsf_BLPport2=

##
#####BUpdater/BNotifier section
##

#seconds to sleep in the main loop
loop_interval=

##
#####BUpdater subsection
##

##Common BUpdater variables

#Updater location
bupdater_path=

#Updater pid file
bupdater_pidfile=/var/tmp/cream_tomcat_bupdater.pid

#Registry file location
job_registry=

#Set the following variable to 'yes' to have multiple BLAHPD instances
#share the job registry -index- via mmap:
job_registry_use_mmap=no

#host for asyncronous notification 
async_notification_host=

#port for asyncronous notification
async_notification_port=

#bupdater debug level
bupdater_debug_level=1

#bupdater debug log file
bupdater_debug_logfile=/var/tmp/bupdater.log

# purge interval
purge_interval=7200

#Minimum interval of time between the last update of a jobid entry and the first finalstate query try (default:30)
finalstate_query_interval=30

#after that interval an unseen job is set as done (status == 4) and exitstatus == 999 (default:3600)
alldone_interval=3600

#Command use to cache info abput the job in the batch system
batch_command_caching_filter=

#poll timeout
bupdater_child_poll_timeout=

#set to yes to enable the blah clustering
job_registry_add_remote=

#time interval between consistency check of blah registry (default 3600)
bupdater_consistency_check_interval=

##LSF

#number of logs to be read by bhist (default:3)
bhist_logs_to_read=

#after that interval a bhist with -n bhist_logs_to_read is tried (default:120)
bhist_finalstate_interval=120

#use the long format for bjobs command (-l instead of -w) (yes|no) (default=yes)
bupdater_bjobs_long_format=yes

#Enable the use of the caching for the batch system commands
#(the command is specified by batch_command_caching_filter)
lsf_batch_caching_enabled=

#use bhist to calculate suspended jobs timestamp 
bupdater_use_bhist_for_susp=no

#if set to yes bhist uses a time constraint to reduce the output (default no)
bupdater_use_bhist_time_constraint=

#use btools (default no)
bupdater_use_btools=

#btools path (default /usr/local/bin)
bupdater_btools_path=

#use bhist for jobs in idle state (default yes)
bupdater_use_bhist_for_idle=

#use bhist for killed jobs (default yes)
bupdater_use_bhist_for_killed=

##PBS

#Enable the use of the caching for the batch system commands
#(the command is specified by batch_command_caching_filter)
pbs_batch_caching_enabled=

#number of logs that tracejob read (default 2)
tracejob_logs_to_read=

#max number of lines in tracejob output. This is done to get rid of
# a bug in pbs that causes tracejob to produce a large output (default 1000)
tracejob_max_output=

##Condor

#condor bin location
condor_binpath=`which condor_submit 2>/dev/null|sed 's|/[^/]*$||'`

#path to condor_config
#export CONDOR_CONFIG="/etc/condor/condor_config"

#Enable the use of the caching for the batch system commands
#(the command is specified by batch_command_caching_filter)
condor_batch_caching_enabled=

#If condor_history should be used or not to the final state info about the jobs.
bupdater_use_condor_history=

##SGE

sge_binpath=

sge_cellname=$SGE_CELL

sge_rootpath=$SGE_ROOT

##SLURM

#path to the slurm executables
slurm_binpath=

##
#####BNotifier subsection
##

#Notifier location
bnotifier_path=

#Notifier pid file
bnotifier_pidfile=/var/tmp/cream_tomcat_bnotifier.pid

#bnotifier debug level
bnotifier_debug_level=1

#bnotifier debug log file
bnotifier_debug_logfile=/var/tmp/bnotifier.log